North Seattle Chimney Pros logo

Chimney Cap Installation cost · North Seattle, WA

How much does chimney cap installation cost in North Seattle, WA?

$265–$850

What we charge for chimney cap installation.

Elsewhere in North Seattle it typically runs $199.95–$800. Market rates observed in North Seattle (King County, WA), surveyed October 4, 2026 — not our quote.

We charge $265–$850 for chimney cap installation in North Seattle. Stainless cap fitted; multi-flue and custom at the top. The exact figure is set in writing after the $99 plus tax inspection, credited toward an approved quote, and you approve it before any work starts.

Chimney Cap Installation in Washington — stainless steel chimney cap installation
  • $265–$850 — what we charge for chimney cap installation
  • $99 plus tax on-site inspection, credited toward an approved quote
  • Written quote before any work starts — you approve the price

What the price includes

What you get for the price

  • Stainless cap fitted; multi-flue and custom at the top
  • A $99 plus tax on-site inspection first, credited toward an approved quote
  • A written, itemized quote with photos — you approve the price before any work starts

How it compares to the rest

What we charge for each service. Chimney Cap Installation is highlighted.

What we charge for chimney services in North Seattle, WA
ServiceWhat we chargeTypical North Seattle priceWhen you need it
Chimney Sweep$209–$459$70–$449.95Annual maintenance, or you burn regularly and it has been a year
Chimney Inspection$99 plus tax$99.95–$803Buying or selling a house, after a chimney fire, or before a new appliance
Chimney ReliningFrom $1,900$1,200–$4,000Cracked clay liner, an unlined chimney, or fitting a stove or insert
Chimney RepairFrom $425$114–$5,000Cracked bricks, open mortar joints, a leaning or spalling stack
Chimney Cap Installation$265–$850$199.95–$800Missing or rusted cap, rain or animals getting into the flue
Masonry Repair (Crown / Repointing)From $475$150–$3,000Cracked or crumbling crown, failing mortar joints across the stack
Chimney Waterproofing$320–$795$200–$500White staining on the brick, or damp showing inside
Chimney Flashing Repair$375–$1,495$300–$800Water stains on the ceiling around the chimney
Gas Fireplace Service$189–$479$150–$299Annual service, or the unit will not light or stay lit
Creosote RemovalFrom $245$300–$600Several seasons since the last sweep, or a hard glaze in the flue
Dryer Vent Cleaning$105–$295$89–$422Clothes need two cycles, or it has been over a year
Air Duct CleaningFrom $525$300–$1,000After a renovation, or after water damage

Market rates observed in North Seattle (King County, WA), surveyed October 4, 2026 — not our quote. Sources: AAA Fireplace — Gas Fireplace Tune-Up, Emerald City Chimney — Prices, Homeyou — Air Duct Cleaning in Seattle, WA costs, Homeyou — Chimney Repair in Seattle, WA costs, Homeyou — Chimney Sweeping in Seattle, WA costs, Homeyou — Dryer Vent Cleaning in Seattle, WA costs, Homeyou — Fireplace Repair in Seattle, WA costs, StarDucts — What does a typical dryer vent cleaning cost in Seattle?, Starbright Chimney — Chimney Sweep Seattle WA, The Mad Hatter Chimney Sweep — Chimney Cap Installation, The Mad Hatter Chimney Sweep — Chimney Liner Installation, The Mad Hatter Chimney Sweep — Chimney Repair, The Mad Hatter Chimney Sweep — Chimney Sweep Cost Seattle: 2025 Pricing Guide, The Mad Hatter Chimney Sweep — Chimney Sweep Seattle, The Mad Hatter Chimney Sweep — Chimney Waterproofing, Washington Energy Services — Fireplace Insert Tune-Up.

Published by others — not our quote

What chimney cap installation costs elsewhere in Seattle

Figures published by other companies and cost guides, local first, national for context. Not our quote.

  • $200–$350 per flue

    Seattle · Not our quote

    Seattle company, standard single-flue cap installed; the page's general figure is $200-$400, custom-fabricated caps $500-$1,200. Undated.

  • $400–$800 per chimney

    Seattle · Not our quote

    Multi-flue cap covering the whole chimney top, same Seattle page.

  • $199.95 per flue

    Seattle · Not our quote

    Standard stainless steel cap, installed, plus tax; custom caps are by estimate. Undated list.

  • $350–$695 per flue

    Seattle · Not our quote

    Top-mount damper with cap: the Seattle-area list starts at $695 plus tax, while The Mad Hatter's cap page (themadhatterchimneysweep.com/chimney-cap-installation) gives $350-$600; the two published figures form this range.

  • $300–$600 per cap

    US national · Not our quote

    National guide (updated August 29, 2025), $425 average; stainless steel $475-$600, copper $575-$650, galvanized $325-$375.

What moves the price

Every figure below is published by a third party. Not our quote.

One flue or the whole top
The Mad Hatter installs a standard single-flue cap for $200–$350 and a multi-flue cap that covers the entire chimney top for $400–$800; a cap fabricated to order is $500–$1,200.
A stock stainless cap
Emerald City Chimney's list has a standard stainless steel cap, installed, at $199.95 plus tax, and sends custom caps to an estimate.
A damper built into the cap
A top-mount damper sold with its cap is the dearer choice: The Mad Hatter's cap page gives $350–$600 for one, and Emerald City Chimney's list starts it at $695 plus tax.
The metal
Fixr's national guide separates caps by material: galvanized $325–$375, stainless steel $475–$600, copper $575–$650, with $425 as the average replacement.

A typical job, at our prices

How the bill adds up

A job at the bottom of our listed price for chimney cap installation — yours is set in writing after the inspection.

Typical chimney cap installation job, priced on our own grid
StepCost
On-site inspectionPaid at the visit, credited toward the quote once you approve it$99
The chimney cap installation itselfBalance due after the inspection credit$166

The total came to $265 before sales tax — our listed starting price for chimney cap installation, with the inspection counted inside it, not on top.

Washington rules that apply

Chimney cap installation cost — questions

What do other companies charge for chimney cap installation?

Published figures, not our quote: The Mad Hatter Chimney Sweep — Chimney Cap Installation: $200–$350 per flue (Seattle, accessed 2026-10-04); The Mad Hatter Chimney Sweep — Chimney Cap Installation: $400–$800 per chimney (Seattle, accessed 2026-10-04); Emerald City Chimney — Prices: $199.95 per flue (Seattle, accessed 2026-10-04); Emerald City Chimney — Prices: $350–$695 per flue (Seattle, accessed 2026-10-04); Fixr — Chimney Cap Replacement Cost: $300–$600 per cap (US national, accessed 2026-10-04). Not our quote — what we charge is shown at the top of this page.

What mesh and open area does the code set for a spark arrestor?

R1003.9.2 and R1003.9.3: where installed, a spark arrestor must have a net free area at least four times the flue outlet and openings that block a 1/2-inch sphere yet pass a 3/8-inch sphere, in 19-gage galvanized or 24-gage stainless steel or equivalent; rain caps need the same four-times free area.

Common questions

Questions about chimney cap installation?

The exact price for your chimney is set on site, in writing, after the $99 plus tax inspection. Our FAQ covers booking, the inspection and where we work.

All our chimney pricesMore chimney questions, answered

Get in touch

Book an inspection

Ready for a clear, written chimney cap installation quote?

Book your inspection — $99 plus tax on-site inspection, credited toward an approved quote.

Book an inspection

Book your $99 inspection

$99 plus tax, deducted when you approve the repair

Service
Town

Book your $99 inspection

Pick a real open slot on our crew's calendar — takes about a minute.

  • No payment to book
  • Written on-site quote
  • Photos of every job
  1. 1
  2. 2
  3. 3
  4. 4

Chimney Cap Installation in Ballard

Pick a date
October 2026
Su
Mo
Tu
We
Th
Fr
Sa
Open times

Loading open times…

Call (206) 429-6308Book